$12,195.00
SKU 5175171
14,000-lb. Capacity / Alignment Lift / Extended / Includes Turnplates and Slip Plates
The legendary, 14,000-lb. capacity HDS-14LSX alignment lift pulls double duty as both car lift and alignment system. We’ve integrated industrial-strength slip plates and turn plates right into the runways to maximize convenience. The wheels respond to every adjustment with virtually no resistance.
HDS-14LSX
SKU 5175171
14,000 pound lifting capacity
CE Approved and Certified. Meets or exceeds the standards prescribed by European Standard EN 1493
Two runway lengths to choose
Heavy-duty turn plates and integrated rear slip-plates included
Multi-position turn plate pockets
Automatic leveling system
Multiple auto-leveling locking positions
Runways include rail-kit for optional accessories
Electric / hydraulic power system
Single hydraulic cylinder mounted underneath runway
Fully enclosed lifting cables, safety locks, and sheaves
Internal “Anti-Sway” slider blocks in each column
Features oversize sheaves and heavy-duty 1/2” aircraft cable
Rugged 1-3/8″ roller axles and oversize self-lubricating cable sheaves
Multi-position safety locks in each column with push-button safety release
Runways adjust for different tread widths and feature a durable matte finish
Optional 7,000 pound capacity bridge jacks available (Model RJ7W)
Capacity
Lifting Capacity*14,000 lbs. (6,350 kg)
*Max Capacity / Front Axle 7,000 lbs. (3,175 kg)
*Max Capacity / Rear Axle 7,000 lbs. (3,175 kg)
Rise
A – Min. Runway Height: 7.5″ (191 mm)
B – Max. Rise: 70″ (1,778 mm)
C – Max. Lifting Height: 77.5″ (1,969 mm)
Time to Full Rise: 60 seconds
Outside Dimensions
D – Overall Width: 130″ (3,302 mm)
E – Outside Length: 213″ (5,410 mm)
F – Overall Length: 242″ (6,147 mm)
G – Height of Columns: 92″ (2,337 mm)
Inside Dimensions
H – Width Between Columns: 120″ (3,048 mm)
I – Drive-Thru Clearance: 98″ (2,489 mm)
Runways
J – Runway Width: 20″ (508 mm)
K – Length of Runways: 197.5″ (5,017 mm)
L – Width Between Runways: 34.5″ (876 mm) or 41.5″ (1,054 mm)
Note: An air supply (minimum: 30 psi / 3 CFM) is required for the safety-lock mechanisms to disengage. It is solely the responsibility of the end-user to provide, install and maintain the air supply.
Note: Not all BendPak lift models meet the standards as prescribed by ANSI/ALI ALCTV-2017 or ANSI/UL 201. Consult www.autolift.org for a complete list or contact BendPak.
BendPak lifts are supplied with concrete fasteners that meet the criteria of the American National Standard ANSI/ALI ALCTV-(Current). Buyer is responsible for all charges relating to any special regional structural or seismic anchoring requirements specified by any other agencies or codes such as the Uniform Building Code (UBC) or International Building Code (IBC).
| Lift Type | Four-Post |
|---|---|
| Lifting Capacity (lb) | 14000.0 |
| Lifting Capacity Range | 14000-15999 lb |
| Alignment Equipment Type | Alignment Lift |
